The bending and cutting unit of Stirrup Bender WG12B-2 (stirrups rebar), driven by servomotor, is equipped with turning and retractile bending pins.
| Production capacity | Single wire | Φ5 – 13 [mm] |
| Double wire | Φ5 – 10 [mm] | |
| Max. bending angle | ±180° [double direction] | |
| Max. bending speed | 1200 [°/sec] | |
| Max. pulling speed | 110 [m/min] | |
| Max. length of the stirrup side (diagonal) | 2,300 [mm] | |
| Min. length of the stirrup side | 120 [mm] | |
| Length tolerance | ± 1 [mm] | |
| Bending tolerance | ± 1° | |
| Average air-compressed consumption | 6 [l/min] | |
| Average electric power consumption | 6 [Kw/h] | |
| Labeled electric power | 28 [Kw] | |
| Voltage | 380 [v] – 50 [Hz] – 3[phase] | |
| Overall machine weight | 4,800 [Kg] | |
| Dimensions | 5,100 × 1,300 × 2,100 [mm] | |
Working angle can be rotated ensures a larger processing range, the max length of stirrup up to 2300mm.
It has automatic wire feeding system, shorten feeding time to 5 seconds, saved lots of time.
Straightening memory straight roll is being used, more convenient replacement of wire changing.
Fixed cutter can be used on both sides to improve the service life; cutting knife is designed with four available sides, service life increased by 4 times, greatly reducing costs.
Driven by full-closed-loop control servo motor which has high-precision, ensures the accuracy of length of ± 1mm, angle accuracy of ± 1 °.
A website by WEBMOTIVOS
